- 3 lb 15 oz.
- 7000 cubic inch main bag
- 4300 cubic inch main bag in bivy-mode
- 500 cubic inch lid (included)
- 2200 cubic inch collapsible internal load cell
- Internal frame / bag is sewn directly to frame
- 26” frame height
- Carbon composite stays / 4 total
- 150+ pound load rating
- Internal spotting scope pocket
- Belt attachments
- 30” side zip access panel
- New SG ULTRA PE Fabric and X-Pac® fabric
- Heavy-Duty YKK® #10 zipper
- Heavy-duty, 1” Duraflex® military-approved buckles and webbing
- Made in the USA
WAIST BELT SIZES
Small 28" - 30"
Large 37" +
The goal was to create the lightest, strongest 7000 cubic inch alpine hunting backpack for the sheep and goat hunter. The result is the new Terminus, weighing in at less than four pounds. By sewing the bag directly to the frame and incorporating an internal load cell, we built this alpine workhorse to get your gear into high country. Using proven SG frame geometry and load capability, we built this pack with plenty of room to get that gear—and meat—back out.
To minimize excess leverage and maximize load placement, the 2200 cubic inch internal load cell positions the meat next to the frame and closest to your center of gravity. This design leaves 4800 cubic inches of usable space to load your gear for the pack out. Two drain holes in the bottom of the main bag prevent blood from pooling inside the load cell.
A new SG ultra-high-molecular-weight polyethylene (UHMWPE) blend fabric is used for the main bag. This new fabric technology offers higher abrasion resistance and tear strength at a lower weight, which makes it perfect for alpine hunts where ounces count. X-Pac® is used for the frame and suspension. Both X-Pac® and SG UHMWPE are waterproof fabrics that will not absorb moisture, though pack seams are not sealed.
We designed the internal load cell to carry the boned-out meat of medium-sized game. For those who prefer to carry out meat bone-in or wish to change to different bags on a frame, the SG Evo and Xcurve might be better options.
We offer a "30-Day Money Back Guarantee". You have 30 days from the date of purchase to return any of our products for a full refund or exchange for a different size. Products must still be in new and resalable condition without any physical damage, stains, etc. We suggest upon arrival of your pack you fit it properly, load it with 30lbs - 40lbs and assure it is comfortable, fits properly, and meets your expectations.
Stone Glacier products have a lifetime warranty against defects in material and workmanship. Any issues associated with normal wear and tear can be repaired at a minimal and reasonable charge. Please call or email us at the below contact information for any warranty related questions or issues.
*Please Note: tears, punctures, burns, and damage from dogs or other animals are not covered under warranty but can be repaired at a minimal charge. Additionally, tears, punctures, and burns are not classified as defects in materials.
Phone: (406) 404-0641
When fitting a Stone Glacier Pack, there are three things we look for in a perfect fit. (A) First, we always want the belt centered on the tip of your hip bone. Belt positioning can be altered by adjusting the attachment height of the shoulder straps. (B) Next, we want to make sure the shoulder straps make solid contact with the backside of our shoulders. (C) If a gap is present between the shoulder strap and shoulder, it often can be eliminated by loosening the load lifters. Lastly, we want to aim for the color transition on the shoulder straps (D) to land on, or close to, your collarbone. Placement can be altered with a combination of adjusting the attachment height of the shoulder straps on the frame sheet and loosening of load lifters.